 |
|
|
|
K Range H/V CONSTRUCTION "SMALL"
|
H/V CONSTRUCTION
FANS DIAMETER 350/450/500 mm
FIN BLOCK
The coils are manufactured with 9,52 mm diameter copper tubes.
The coil geometry is a staggered pitch with high efficiency fins in Aluminium and 2,1 mm spacing.
The circuits are designed for counter flow; the headers are in copper with a 1/4" manometer socket.
The coil blocks are tested in water with dry air at a pressure of 30 bar.
CASING
Pre-painted Alluminium RAL 9010 of different thicknesses according to the design and the material.
The condensers are equipped with a protective covering on the return ben.
FANS - FOR SERIE K__35 / K__45
The sound levels are declared by the fan-manufacturer according to EN 13487 standards.
All the fans are equipped with a built in thermal contact.
Single-phase with 1 speed, insulation class B and F; 230V+/-10%/50Hz (IP54)
FANS - FOR SERIE K__50
The sound levels are declared by the fan-manufacturer according to EN 13487 standards.
All the fans are equipped with a built in thermal contact.
3-phase with 2 speeds, insulation class B and F; 400V+/-10%/50Hz (IP54)
|
K Range H/V CONSTRUCTION "LARGE"
|
H/V CONSTRUCTION
FANS DIAMETER 630/800/900/1000 mm
FIN BLOCK
The coils are manufactured with 9,52 mm or 12 mm diameter CROSSFIN copper tubes.
The coil geometry is a staggered pitch with high efficiency fins in Aluminium and 2,1 mm spacing.The circuits are designed for counter flow; the headers are in copper with a 1/4" manometer socket.
The coil blocks are tested in water with dry air at a pressure of 30 bar.
CASING
Galvanized steel epoxy painted RAL 9002 of different thicknesses according to the design and the material.
The dry coolers are equipped with a protective covering on the return bends side.
FANS
The sound levels are declared by the fan-manufacturer according to the EN 13487 standards.
All the fans are equipped with a built in thermal contact.
3-phase with 2 speeds, insulation class B and F; 400V+/-10%/50Hz (IP54)
|
K Range V-SHAPE CONSTRUCTION
|
H/V CONSTRUCTION
FANS DIAMETER 800/900/1000 mm
FIN BLOCK
The coils are manufactured with 9,52 mm or 12 mm diameter CROSSFIN copper tubes.
The coil geometry is a staggered pitch with high efficiency fins in Aluminium and 2,1 mm spacing.The circuits are designed for counter flow; the headers are in copper with a 1/4" manometer socket.
The coil blocks are tested in water with dry air at a pressure of 30 bar.
CASING
Galvanized steel epoxy painted RAL 9002 of different thicknesses according to the design and the material.
The dry coolers are equipped with a protective covering on the return bends side.
FANS
The sound levels are declared by the fan-manufacturer according to the EN 13487 standards.
All the fans are equipped with a built in thermal contact.
3-phase with 2 speeds, insulation class B and F; 400V+/-10%/50Hz (IP54)
|
|
