PROTECTION COATINGS

P

PRE-PAINTED HYDROPHILIC COATING

Description:
The hydrophobic coating gives the drops of water wetting the fin a spheroid shape (contact angle > 50°) for easier draining.

Technical data:
• Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with polyester lacquer.
• Corrosion resistance: 1000 hours (ASTM B117).

L

PRE-PAINTED HYDROPHILIC COATING

Description:
The " hydrophilic " coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°). These conditions favour circulation and the adiabatic saturation of the air between the fins with notable heat exchange benefits.

Technical data:
• Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.
• Corrosion resistance: 250 hours (ASTM B117). 

THERMOGUARD®

Polyurethane based coating.
High flexible properties.
Heat conduction and UV resistant properties.
Prevents chemical and galvanic corrosion.
Corrosion resistance (ASTM B117): 3000 hours.

BLYGOLD®

Heat conductive pigmentation.
Very high chemical resistance at a low layer thickness.
Corrosion resistance (ASTM B117): 4000 hours.

HERESITE®

Suitable for marine and salt air environments.
Withstand exposure to an extensive variety of corrosive and chemical fumes.
Corrosion resistance (ASTM B117): 6.000 hours.

ELECTROFIN®

Water-based, flexible cationic epoxy polymer using an electro-coat process.
It guarantees complete heat exchanger coverage.
Corrosion resistance (ASTM B117): 6.000 hours.
C5M & C5I High Durability (ISO 12944).

FRAME SPECIAL COLOURS

All RAL chart available on request.

REFRION S.r.l. Vicolo Malvis, 1 - 33030 Flumignano di Talmassons (UD) - P.IVA 03094850231

DRY COOLER | GAMMA DRY COOLER