Description:
The " hydrophilic " coating, with high surface tension in other words, gives the drops of water wetting the fin a flattened shape (contact angle < 15°). These conditions favour circulation and the adiabatic saturation of the air between the fins with notable heat exchange benefits.
Technical data:
• Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with hydrophobic lacquer.
• Corrosion resistance: 250 hours (ASTM B117).
Description:
The hydrophobic coating gives the drops of water wetting the fin a spheroid shape (contact angle > 50°) for easier draining.
Technical data:
• Aluminum fin made of 8079 alloy (EN 573-3) pre-painted with polyester lacquer.
• Corrosion resistance: 1000 hours (ASTM B117).
Polyurethane based coating.
High flexible properties.
Heat conduction and UV resistant properties.
Prevents chemical and galvanic corrosion.
Corrosion resistance (ASTM B117): 3000 hours.
Heat conductive pigmentation.
Very high chemical resistance at a low layer thickness.
Corrosion resistance (ASTM B117): 4000 hours.