![refrion_tower_condensatore](https://www.refrion.com/wp-content/uploads/2020/06/refrion_tower_condensatore.png)
Tower
Special architectural requirements
Refrion has designed the Tower series which maintains the same level of performance, while limiting the overall height dimensions, thus achieving an installation with a low visual impact.
![](https://www.refrion.com/wp-content/uploads/2021/08/refrion_tubo_ovale_contronto_tubo_tondo-1.png)
FINNED PACK HEAT EXCHANGERS
12 mm or with 5/8” nominal diameter, staggered pitch pattern and high-efficiency fins. Standard fin pitch: 2.1 mm.
Favourable thermodynamic properties, high energy efficiency and low cost make Ammonia a useful refrigerant widely used in modern vapor-compression refrigeration; in a mixture along with hydrogen and water, it is also used in absorption refrigerators. NH3 is incompatible with copper, therefore stainless-steel tubes heat exchangers prove to be the optimal technical solution for this application.
Nominal diameter 12mm and 5/8” are available.
Steel grades: AISI 304 and AISI 316L.
![](https://www.refrion.com/wp-content/uploads/2020/05/refrion_strain_relief_system_SRS.png)
Strain
Relief
System
Our exclusive system to stabilise the machine and avoid bending during all movements (lifting, transportation, installation) and over its entire life cycle.
FANS
- AC THREE-PHASE OR SINGLE-PHASE: with thermal protection, lubricated for life, statically
and dynamically balanced. - BRUSHLESS ENERGY-SAVING EC THREE-PHASE combines excellent performance with extremely low consumption and noise levels.
CASING
Request information
Contact us for any information, clarification or specification about our products and services.